Fenix P3D CE

Fenix P3D CE is a Digital Series flashlight from Fenix. With two CR123 battery, Cree XR-E LED, Body built of aluminium and hard anodize type III, water tight with O-Rings, P3D CE is very bright, strong built, good quality light. P3D CE is Microcontroller (µC) Controlled with 2 UI (User Interface) modes. In Turbo Mode the light operates with Max Brightness and Strobe. The General Mode has 3 output levels and SOS function.

Light Features:

• Can run on various CR123 sized battery ranging from Primary Lithium to Li-Ion cells
• Microcontroller (µC) Controlled
• Max Output, with Strobe in Turbo Mode
• Three light output levels and SOS in General Mode
• Toughened ultra clear glass lens with AR coating
• Cree XR-E LED
• Can stand on tail

Turbo Mode: This mode is attained by tightening the bezel to full. It consists of Max Level [135 Lm] and Strobe. The sequence alternates in cycle.

• Press the tail cap button until 'click' sound is heard to switch ON the light
• To change Mode, in ON condition, push the tail cap button until light is off for about half a second and release for next mode. The modes will cycle through
• Press the button on tail cap until 'click' sound is heard to switch OFF the light

General Mode: This mode is attained by loosing the bezel. The General Mode consist of [9 Lm]-[40 Lm]-[80 Lm]-[SOS].

• Press the tail cap button until 'click' sound is heard to switch ON the light
• To change Mode, in ON condition, push the tail cap button until light is off for half a second and release to enter next level. The modes will cycle through
• Press the button on tail cap until 'click' sound is heard to switch OFF the light

Below is the chart showing total output levels for various CR123 batteries

P3D CE Standard
Level	2x CR123 (3v)	2x RCR123 Li Ion (3.7v)
Low	62	66
Med	280	227
High	680	670
Max	1280	1300

General Info
ID	18
Light Model	P3D CE
Manufacturer	Fenix Light
Review Page & Image	P3D CE
Country	China
Review Date	2007-06-21
Review Update	2007-07-29
Light Vitals
Length	114 mm
Width / Bezel Diameter	22 mm
Width / Tube Diameter	19 mm
Height (if applicable)	mm
Weight (without battery)	64 gm
Light Source
LED Format	Power LED
Number of LEDs	1
LED Name	Cree XR - E
LED Power	3  Watts
Light Management
Lens Material	Glass
Lens Coating (if any)	AR Coated
Lens Transperency (typical)	90
Lumen Management	Reflector
Material	Aluminium Metal Smooth
Beam Type	Mostly Throw
Power Management
Converter Type	Buck
Properties	Regulated, Micro Controller (uC)
Features	Advanced User Interface
Batteries Supported, Output & Runtime
Battery Size     Chemistry     Nominal Voltage     # Used     Total Output     Runtime to 75%     Runtime to 50%     Runtime to 25%	CR123 CR123 LiMnO2   Li-Ion   3 3.7 2 2 1230 1238 0 0 0 0 0 0
Switch Options
Switch Type     Switch Properties	Click Reverse Click
Body Material Options
Material     Properties     Color	Aluminium Type III Hard Anodized Black
Light Rating
Looks	80
Build Quality	70
Runtime	80
Output	80
Features	70
Usability	70
Bang for buck	70
Overall Rating	74.286

Size Comparison: From L to R: CR123 Battery, Fenix P3D CE, Fenix P2D CE


Bezel: From L to R: Fenix P3D CE, Fenix P2D CE


Body:

Below Beam shot Matrix shows Fenix P2D CE on Left and Fenix P3D CE on Right

	+1	0	-1
Low
Med
High
Max