Fenix P1 CE Q2 Special Edition

Fenix P1 CE Q2 Special Edition is a Special Series flashlight from Fenix brought to you by www.fenix-store.com. With single CR123 battery, Cree XR-E LED, Body built of aluminium and hard anodize type III, water tight with O-Rings, P1 CE Q2 SE is very bright, strong built, good quality, small size light. P1 CE Q2 SE is one of the smallest and brightest size single CR123 lights available in the market. The total output of the light is stated to be more than 90 Lumens. Due to it's very small size and high output it is very commonly known as a Pocket Rocket. The specialty of P1 CE Q2 SE is that it has Q2 Binned Cree XR-E LED and sports a Textured Reflector.

Light Features:

• Can run on various CR123 sized battery ranging from Primary Lithium to Li-Ion cells^*
• Toughened ultra clear glass lens with AR coating
• Q2 Bin Cree XR-E LED
• Textured Reflector
• Very small size
• Very simple operation
• Can stand on tail

^*Using rechargeable Li-Ion battery in P1 CE Q2 SE makes LED to go in Direct Drive mode. Switching ON light with RCR123 Li-Ion battery for extended period of times can be harmful. The light may get very hot to touch. Care should be taken. P1 CE Q2 SE is not designed to natively accept RCR123 Li-Ion battery as the electronics is step up circuit, however, yet can safely handle Li-Ion Battery for a few Minutes.

Light Operation: Simple Twist Switch. To turn ON the light, simply twist the bezel in clock wise direction; to turn OFF turn the bezel in reverse clock wise direction

General Info
ID	20
Light Model	P1 CE Q2 SE
Manufacturer	Fenix Light
Review Page & Image	P1 CE Q2 SE
Country	China
Review Date	2007-08-01
Review Update	2007-08-01
Light Vitals
Length	71 mm
Width / Bezel Diameter	22 mm
Width / Tube Diameter	18 mm
Height (if applicable)	mm
Weight (without battery)	26 gm
Light Source
LED Format	Power LED
Number of LEDs	1
LED Name	Cree XR - E
LED Power	3  Watts
Light Management
Lens Material	Glass
Lens Coating (if any)	AR Coated
Lens Transperency (typical)	90
Lumen Management	Reflector
Material	Aluminium Metal LOP
Beam Type	Mostly Throw with good side spill
Power Management
Converter Type	Step Up
Properties	Regulated
Features	Good Regulation
Batteries Supported, Output & Runtime
Battery Size     Chemistry     Nominal Voltage     # Used     Total Output     Runtime to 75%     Runtime to 50%     Runtime to 25%	CR123 LiMnO2   3 1 850 0 0 0
Switch Options
Switch Type     Switch Properties	Twist Simple, Reliable
Body Material Options
Material     Properties     Color	Aluminium Type III Hard Anodized Black
Light Rating
Looks	75
Build Quality	70
Runtime	80
Output	70
Features	20
Usability	80
Bang for buck	70
Overall Rating	66.429

Package: Fenix P1 CE Q2 Special Edition comes nicely packed in cardboard box with transparent window showing the light


Package Contents: Inside the package you will find Fenix P1 CE Q2 Special Edition light, Extra O-Ring, key chain attachment, Holster and instruction manual / warrantee card (not shown)


Size Comparisons
From L to R: Fenix P1 CE Q2 Special Edition, Nuwai QIII, Fenix P1 CE Q2 Special Edition, Fenix P2DCE


From L to R: Fenix P1 CE Q2 Special Edition, Fenix P3DCE


From L to R: Fenix P1 CE Q2 Special Edition, CR123 Battery


Bezel: From L to R: Fenix P2DCE, Fenix P1 CE Q2 Special Edition


From L to R: Fenix P1 CE Q2 Special Edition, Nuwai QIII


Textured Reflector: One of the key features of P1 CE Q2 SE is the Textured Reflector pictured below


Another view of P1 CE Q2 SE Textured Reflector


Body:


Another view of P1 CE Q2 SE body showing the laser engraving for fenix-store.com and Special Edition Q2




Components: Opened head, notice thick tab in positive contact


Another view showing the closeup of the positive contact tab. The main advantage of having this is it offers better contact and greater wear and tear resistance.

Below Beam shot Matrix shows Fenix P1 CE Q2 Special Edition on Left and Various Lights on Right

	+1	0	-1
Fenix P2D CE on High
Nuwai QIII with RCR123 & T Binned Luxeon III
Fenix P3D CE on High