Fenix L2D CE

Fenix L2D CE is a Digital Series flashlight from Fenix. With two AA batteries, Cree XR-E LED, Body built of aluminium and hard anodize type III, water tight with O-Rings, L2D CE is very bright, strong built, good quality light. Fenix L2D CE is Microcontroller (µC) Controlled with 2 UI (User Interface) modes. In Turbo Mode the light operates with Max Brightness and Strobe. The General Mode has 3 output levels and SOS function.

Light Features:

• Can run on various AA sized battery ranging from NiMH to Primary Lithium's
• Microcontroller (µC) Controlled
• Max Output, with Strobe in Turbo Mode
• Three light output levels and SOS in General Mode
• Toughened ultra clear glass lens with AR coating
• Cree XR-E LED
• Can stand on tail

Light Operation: The Tail cap Switch in L2D CE is 'Reverse Click' type switch.
Turbo Mode: This mode is attained by tightening the bezel to full. It consists of Max Level [135 Lm] and Strobe. The sequence alternates in cycle.

• Press the tail cap button until 'click' sound is heard to switch ON the light
• To change Mode, in ON condition, push the tail cap button until light is off for about half a second and release for next mode. The modes will cycle through
• Press the button on tail cap until 'click' sound is heard to switch OFF the light

General Mode: This mode is attained by loosing the bezel. The General Mode consist of [9 Lm]-[40 Lm]-[90 Lm]-[SOS].

• Press the tail cap button until 'click' sound is heard to switch ON the light
• To change Mode, in ON condition, push the tail cap button until light is off for half a second and release to enter next level. The modes will cycle through
• Press the button on tail cap until 'click' sound is heard to switch OFF the light

Below is the chart showing total output levels for various AA batteries in General Mode

Fenix L2D CE
Level	NiMH	Alkaline	Lithium (1.7v)
Low	67	69	69
Med	300	310	305
High	600	610	610
Max	1115	1180	1170

General Info
ID	19
Light Model	L2D CE
Manufacturer	Fenix Light
Review Page & Image	L2D CE
Country	China
Review Date	2007-07-22
Review Update	2007-07-23
Light Vitals
Length	147 mm
Width / Bezel Diameter	22 mm
Width / Tube Diameter	17 mm
Height (if applicable)	mm
Weight (without battery)	55 gm
Light Source
LED Format	Power LED
Number of LEDs	1
LED Name	Cree XR - E
LED Power	3  Watts
Light Management
Lens Material	Glass
Lens Coating (if any)	AR Coated
Lens Transperency (typical)	90
Lumen Management	Reflector
Material	Aluminium Metal Smooth
Beam Type	Mostly Throw
Power Management
Converter Type	Step Up
Properties	Regulated, Micro Controller (uC)
Features	Advanced User Interface
Batteries Supported, Output & Runtime
Battery Size     Chemistry     Nominal Voltage     # Used     Total Output     Runtime to 75%     Runtime to 50%     Runtime to 25%	AA AA AA NiMH   Alk   LiFeS2   1.2 1.6 1.7 2 2 2 1115 1180 1170 0 0 0 0 0 0 0 0 0
Switch Options
Switch Type     Switch Properties	Click Reverse Click
Body Material Options
Material     Properties     Color	Aluminium Type III Hard Anodized Black
Light Rating
Looks	60
Build Quality	70
Runtime	85
Output	65
Features	70
Usability	75
Bang for buck	80
Overall Rating	72.143

Size Comparison: From L to R: AA Battery, Fenix L2D CE, Fenix L2P V1


Bezel: From L to R: Fenix L2D CE, Fenix L2P V1


Body:

Below Beam shot Matrix shows Fenix L2P V1 on Left and Fenix L2D CE on Right

	+1	0	-1
Low
Med
High
Max